Industrial Ultrasonic Cleaning Equipment

Grease packed into threads, carbon baked onto injector tips, and polishing compound stuck in a recess generally require a more intensive cleaning process. Ultrasonic cleaning equipment reaches those spots with sound, using clouds of collapsing bubbles to scrub the part's surface. We've design and manufacture these systems in our own Factory in Williamstown, WV, and have been in business since 1920.
Request Info
How Industrial Ultrasonic Cleaning Works
Ultrasonic transducers turn electrical energy into high-frequency vibration. Pressure waves travel through the cleaning liquid, and on each low-pressure swing, tiny vacuum bubbles form. They collapse on the next high-pressure swing, releasing a small burst of energy directly at the surface. This phenomena is known as cavitation, and it works wherever the liquid can reach, including blind holes and the underside of a thread.
Heat and chemistry carry the rest of the load. A warm bath softens oils and thins them out, and a matched detergent loosens the bond between soil and metal so cavitation can lift it away. We explain the physics in more depth in our article on how heated ultrasonic cleaners work.
System Configurations
Our ultrasonic cleaners come in standard and custom sizes. The five configurations below cover the requests plant engineers bring to us on a regular basis.
- Benchtop: Compact tanks for labs, tool rooms, and small precision parts, with options for frequency, heat, and filtration. We also design benchtop units for clean rooms.
- Large capacity: Industrial tanks sized and shaped to the part, from long tubing to heavy assemblies, with baskets, racks, or hoists for loading.
- Multi-stage: Wash, rinse, and dry stations set in a line, so parts leave ready for the next operation. Filtration, oil coalescing, and skimming keep the wash tank productive between changes.
- Heated: Electric, steam, or gas heat, matched to your plant's utilities and the temperature your chemistry needs.
- Explosion-proof: Class 1, Division 1 designs for flammable solvents such as acetone and isopropyl alcohol, plus intrinsically safe versions for hazardous areas.
Choosing a Frequency
Frequency sets the size of the cavitation bubbles. Lower frequencies, roughly 20 to 40 kHz, produce fewer but larger bubbles with a harder punch, which suits engine parts, injectors, and carbon deposits. Higher frequencies, from about 70 kHz up, create smaller and denser bubbles for polished finishes, optics, and medical instruments. Forty kilohertz sits in the middle as a versatile default.
Soft metals deserve some caution, because the harder punch of a low frequency can mark aluminum and similar materials. Our guide on choosing the best ultrasonic cleaner frequency walks through materials, soils, and precision requirements one at a time.
Tank Sizing
Size the tank around your largest part, then add room. Leave at least an inch of clearance on each side so liquid can circulate, and the sound field reaches the part evenly. Account for the mass of parts and fixtures as well, because heavy loads displace liquid and soak up energy. Long tubes or odd shapes may call for a deeper or custom tank. Our article on what size ultrasonic cleaner you need compares compact and large systems in more detail.
Cleaning Chemistry
Aqueous detergents handle the bulk of industrial ultrasonic work. Alkaline blends cut grease and oils, and acidic formulas lift scale and oxidation. Foam is the enemy here, because a frothy bath dampens the sound waves before they reach the part.
Solvent chemistry earns its place when parts can't tolerate water or when soils won't respond to detergent. Solvent baths need specialized equipment, which is where our Class 1, Division 1 systems come in. Planning to run a commercial degreaser? Check compatibility first, and read our post on using degreaser in an ultrasonic cleaner before you fill the tank.
Industries
Our ultrasonic systems clean parts across heavy industry and precision manufacturing.
- Aerospace: Turbine hardware, fittings, and machined components headed for inspection or coating.
- Automotive: Fuel injectors, carburetors, and engine parts with heavy carbon and oil deposits.
- Medical manufacturing: Surgical instruments and device components that need gentle, high-frequency cleaning before packaging and sterilization.
- Defense: Military optics and precision assemblies that call for careful handling.
- Marine: Engine and hardware parts caked with salt, scale, and heavy grime.
- Metal finishing and machining: Remove buffing compound and cutting oils before plating or assembly.
Made in the USA
We design and manufacture our ultrasonic cleaners at our factory in Williamstown, WV. Engineering, fabrication, and service sit with one team, shortening the path from question to answer, and spare parts ship from our own inventory. Our article on why you should choose American-made ultrasonic cleaners covers the practical side of buying domestic equipment.
Put Your Toughest Parts to the Test
The fastest way to judge ultrasonic cleaning equipment is to watch it work on your own parts. A short trial answers questions about frequency, chemistry, and sizing.
Box up a few of your hardest-to-clean parts and reach out to Baron Blakeslee for a cleaning trial.
FAQs
Only in a system rated for that hazard, so tell us the solvent and its flash point at the quote stage. Standard aqueous tanks lack the controls that flammable liquids require. We design explosion-proof units for acetone, isopropyl alcohol, and similar solvents. Your facility's safety team should also review the installation area before the machine arrives.
A simple aluminum foil test shows whether cavitation reaches the whole tank, because active areas pit or perforate the sheet after a short run. Run the test during setup and repeat it on a schedule so you catch a failing transducer early. Our article on how to tell if an ultrasonic cleaner is working lists more checks.
It can when the frequency, power, or temperature doesn't suit the material. Rubber, soft plastics, and delicate coatings deserve a test run before production starts. Trial cleaning on a few sample parts lets you inspect the surfaces against your own quality standards. Our engineers can then adjust the settings before the system ships.
Send part drawings or samples, the soils involved, your target throughput, and the utilities available at your site. Include the hazardous-area classification if solvents are part of the plan. With those details, we can recommend a frequency, tank size, and configuration in one proposal. If you already run an older tank, share its size and frequency so we can compare results.
